Technical specification
26 mm Ring Crown Cap
RipCap overprint varnish prevents abrasion of the print design.
Technical specification / Crown corks and RipCaps
Product information
Technical specifications
Cap shell and ring
| Parameter | Specification |
|---|---|
| Cap shell: material | Sheet steel |
| Cap shell: thickness | Tinplate 0,17 mm or tin-free steel (TFS) 0,17 mm |
| Cap shell: hardness | T2 |
| Cap shell: tin coating | 2,8g/m2/2,8g/m2 |
| Ring blank: thickness | Tinplate 0,17 mm |
| Ring blank: hardness | T2 |
| Ring blank: tin coating | 5,6g/m2/5,6g/m2 |
Coatings and printing
| Parameter | Specification |
|---|---|
| Inside lacquer (BPA-NI) | Mod. vinyl resin or polyester-phenolic |
| White coating (BPA-NI) | Mod. Polyester |
RipCap overprint varnish prevents abrasion of the print design.
| Parameter | Specification |
|---|---|
| Inks (BPA-NI) | Alcyd |
| Overprint varnish (BPA-NI) | Polyester base |
Coating treatment includes the use of a special lacquer, approved by the FDA, on all cut edges and on the ring.
Liner
| Parameter | Specification |
|---|---|
| Liner | PVC standard or PVC-free |
| Use | Cold and hot fill or/and pasteurisation |
The liner is a circular seal fixed on the inside area of the cap.
Let's discuss your project
Share the requirements for this category.
Tell us about your packaging.
Share the bottle, the beverage and the closure you are considering.